Ergonomically modelled housing, easy nozzle change, switch between air & ice or air only

part number: 4.775-545.0

8m long blasting hose with electrical control wire and quick couplers, non-marking casing

part number: 4.013-039.0

This add-on kit is RECOMMENDED for all types of air compressors. Operating experience showed that the air quality generated by even new and high-grade compressors is often not sufficient.

part number: 2.641-249.0

Reduces the size of the dry ice pellets, so also very sensitive surface can be cleaned.

part number: 4.130-416.0

Hand grip for extension (similar to the ones for hammer drills)

part number: 6.321-206.0

Reduces air volume adapting on different compressor performance, 8mm

part number: 4.130-420.0

Reduces air volume adapting on different compressor performance, 6mm

part number: 4.130-421.0

Reduces air volume adapting on different compressor performance, 10mm

part number: 4.130-422.0

For convenient ice blasting it is often necessary to extend the length of the nozzle

part number: 4.130-417.0

90° angled blasting pipe that can be used in combination with all available nozzles.
Additional connector 4.130-425.0 is required. 

part number: 4.321-203.0

90° angled blasting pipe that can be used in combination with all available nozzles.
Additional connector 4.130-425.0 is required. 

part number: 4.321-204.0

Necessary to connect all available angle pipes

part number: 4.130-425.0

For heavy soiling.

part number: 4.130-418.0

For lighter soiling with a higher area output.

part number: 4.130-419.0

For a higher area output.

part number: 4.130-423.0

Plastic nozzle case (without foamed insert).

part number: 6.421-311.0

Used for filling the machine with dry ice pellets.

part number: 4.321-198.0

The threads of the nozzles have to be regularly treated with this grease.

part number: 6.288-072.0

part number: 6.321-207.0

part number: 6.321-208.0

part number: 6.321-210.0

Flat wrench for nozzle change (2 pieces required) 

part number: 7.815-009.0